Kawasaki Ninja 1000 Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
It would be a simple case of extending paralleling the wire pair up to the front instrument cluster so you can connect onto the stalk of the mirror. The current draw should not be much especially with LED lights so the fuse size should be fine.
 

·
Registered
Joined
·
379 Posts
Have just ordered 2015 mirrors for my 2012. But while I was looking I noticed options for mirrors that contain indicators incorporated on ebay.
I have done that as well, you will like it, much better !


About the ZX-10R mirrors ...
don't, just don't ... you will ruin your rear view (and the looks of the bike).

Check the Z1000SX.co.uk forum, they have similar threads with photos there.
Don't go for the baracuda's either.

There is however another model from Highsider, the Torezzo, which has LED turn signals, and doesn't look that bad on our bike.
I've proposed it on the z1000sx.co.uk forum, and if I remeber well, 2 members tried it out. Pictures on that forum as well.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top