Kawasaki Ninja 1000 Forum banner

Triple Clamp Sticker

2473 Views 4 Replies 4 Participants Last post by  mrsand
Looking to find a Triple clamp sticker for the 2014 N1K
Even just a template would suffice. i know a sticker maker.

Sample of what Im talking about in Picture.
Not the one I need. I need for the 2014 1000 ABS
See less See more
1 - 5 of 5 Posts
I doubt any shop will have one in stock. Your best bet is to pull it. Its very different than that photo. Small area showing. I bet you could measure it and do a paper template easier than pulling it. The other thing is the pitted surface might not hold a sticker well. Might need sanding to make it nice and smooth.
I doubt any shop will have one in stock. Your best bet is to pull it. Its very different than that photo. Small area showing. I bet you could measure it and do a paper template easier than pulling it. The other thing is the pitted surface might not hold a sticker well. Might need sanding to make it nice and smooth.
This. Nothing an exacto knife (or sharp box cutter) and a pencil can't take care off. You can source a sheet of vinyl for a few bucks online.
This. Nothing an exacto knife (or sharp box cutter) and a pencil can't take care off. You can source a sheet of vinyl for a few bucks online.
So true, thanks. Ultimately this is my plan if i am not able to find someone who has already made a template. I suck with a blade so Id have to definitely take it off first.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top