Kawasaki Ninja 1000 Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Just installed the moto dynamics fender eliminator on my 2013. I used the stock signals, reversed the mounts that came with the kit, and drilled holes on the bracket to mount them inside as far as possible. Now my signals only stick out as far as the grab handles. Also removed the front reflectors and replaced all fender bolts with black ones.
 

Attachments

·
Registered
Joined
·
14 Posts
Discussion Starter #2
Just installed the moto dynamics fender eliminator on my 2013. I used the stock signals, reversed the mounts that came with the kit, and drilled holes on the bracket to mount them inside as far as possible. Now my signals only stick out as far as the grab handles. Also removed the front reflectors and replaced all fender bolts with black ones.
Another pic:
 

Attachments

·
Premium Member
Joined
·
545 Posts
I have one of these on the way, will it work with cortech saddlebags?
My model of Cortech saddlebags rested in front of the turn signals so assuming this mod doesn't move the signals too far forward you you should be good to go.

 

·
Registered
Joined
·
14 Posts
I was having a crack at putting one on my bike this morning, however I had to take a rack off first, which the guy I bought it from had fitted. Not sure if the rack changed the set up but the instructions made no sense to me, 4 bolts and 2 screws was not computing at all.

Anyway after that long winded introduction, I was wondering if anyone has a link to a video of the installation:)
 

·
Registered
Joined
·
711 Posts
I intend to go with this setup myself - MotoDynamic integrated tail and the eliminator kit. I also intend to make the kit easily swapable between the eliminator and the OEM fender.

I have seen that the OEM fender is actually functional in keeping crap off of your back. In the rainy season, I'd like to keep it accessible.
 
1 - 9 of 9 Posts
Top