Senior Member
| Page 1 of 2 | 1 | 2 |
|
|
LinkBack | Thread Tools |
Ninja
Help with dash indicators
I rode the bike to work today. When I got on it to go home, I noticed that the ABS light didn't go off when I left the parking lot. I've had this happen on very rare occasions so, at the next stop light, I turned the bike off and restarted it. Once I started moving, the light went off. Great!
After about a mile, it came back on. After another 1/4 mile, all 3 amber lights light up solid (ABS, engine and KTRC). Also, all of the power (F and L) and KTRC (1, 2 and 3) LCD images started flashing. The bike was running perfectly fine. I pulled off the road and power cycled the bike again. Same thing. It started off ok but everything lit up after a couple miles.
Has anyone seen this before? I quick search online doesn't come up with anything. I'm getting the manual out as soon as I post this but I'm not very confident that it'll help.
After about a mile, it came back on. After another 1/4 mile, all 3 amber lights light up solid (ABS, engine and KTRC). Also, all of the power (F and L) and KTRC (1, 2 and 3) LCD images started flashing. The bike was running perfectly fine. I pulled off the road and power cycled the bike again. Same thing. It started off ok but everything lit up after a couple miles.
Has anyone seen this before? I quick search online doesn't come up with anything. I'm getting the manual out as soon as I post this but I'm not very confident that it'll help.
| Sponsored Links | |||
|
Advertisement |
|
||
Senior Member
Join Date: Dec 2015
Location: SE TN
Posts: 5,229
Check abs sensor on wheel, might of picked up trash, or got bent
2012 N1000 spark bl and gray ABS
Tail tidy
Urban brawlers
V/h DB killers sitting on the shelf collecting dust
Givi rack and topcase
Puig smoked wind screen
oem gel seat set
Rascal grafiks tank pad
Grip puppies
SW Motech ninja 1000 quick connect gps mount with navi bag
2014 air filter and holey bottom plate
Go Cruise Throttle lock
Ivans ECU flash
Bridgestone S21's
Widow maker
Widow maker
Only seen it once..... when a bolt backed out of the sensor after a tire change.
6-25-2016, New 2015N1K, now w/43000 and updated regularly
Ivan's, Barringed up, Yoshi tail tidy, Akra header to a modified underbelly exhaust and Urban Brawlers, Profile bi lens LED projectors, white / amber switchback marker / blinker.
| Sponsored Links | |||
|
Advertisement |
|
||
removed both ABS sensors. Cleaned them off but they weren't very dirty and they weren't loose. Same issue. Guess I'll take it to the dealership and let them plug it in....
You could pull the front seat and check the connector at the pivot point of the gas tank. Not sure were the front one is.
6-25-2016, New 2015N1K, now w/43000 and updated regularly
Ivan's, Barringed up, Yoshi tail tidy, Akra header to a modified underbelly exhaust and Urban Brawlers, Profile bi lens LED projectors, white / amber switchback marker / blinker.
Senior Member
Join Date: Dec 2013
Posts: 9,288
You should try to download a manual. There are a lot of easy things to check before you take it to the dealer. If it's a warranty thing, no big deal.
2018 Kawasaki Ninja 1000
I have the 17+ model manual if you want, let me know...
Ride hard, ride safe.
2018 Ninja 1000
R&G Frame Sliders
R&G Engine/Clutch Cover
K&N Air filter
De-cat and Y link Pipe
SP Engineering Demon Slip-ons
Rear grab rail delete
Senior Member
Join Date: Sep 2018
Posts: 133
Let us know what went wrong.
Quote:
Originally Posted by agurudev
View Post
I have the 17+ model manual if you want, let me know...
Thank you but I have a 2015 so that probably won't do me much good. I'm looking around. Lots of options out there.
I'll keep you guys posted.
Senior Member
Join Date: Jun 2014
Location: Montreal
Posts: 865
Is it showing any codes ?
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
Show Printable Version Show Printable Version
Email this Page Email this Page
|
|
|
| Posting Rules | |
